News
All News
March 11, 2026. Blog Articles
Wind turbine noise isn’t just an annoyance — it’s a design challenge engineers can actually solve. Serrated and wavy blade edges are transforming how we control wind turbine aeroacoustics.
March 11, 2026. Case Study
This case study shows how GridPro’s structured meshing enables accurate CFD analysis of rotor–stator interaction, flow instability, and blade loads, delivering reliable, grid independent results validated against experimental data.
February 18, 2026. Case Study
This case study shows how GridPro’s structured meshing enables accurate CFD analysis of rotor–stator interaction, flow instability, and blade loads, delivering reliable, grid independent results validated against experimental data.
February 04, 2026. Version Release
GridPro Unveils Version 10.1: A leap forward in Structured Multiblock Meshing.
February 02, 2026. Blog Articles
Tip vortices are small, powerful tornadoes of air that form at the blade tips. If your mesh erases them, your near-wake loads, noise predictions, and downstream flow are wrong.
January 13, 2026. Blog Articles
Vortex generators can boost turbine performance dramatically—but only if your mesh captures their near-wall physics with accuracy.
January 08, 2026. Case Study
GridPro’s adaptive structured meshing enables accurate hypersonic reentry capsule simulations by resolving shocks, boundary layers, and wakes efficiently, delivering grid-converged aerodynamic predictions with significantly fewer cells and reduced computational cost.
January 8, 2026. Blog Articles
Behind every accurate wind-turbine CFD simulation lies one secret ingredient — the mesh. It shapes how air, pressure, and turbulence are understood by your solver.
December 08, 2025. Case Study
GridPro’s structured multiblock meshing delivers smooth, boundary-layer-resolved grids that enhance convergence and accuracy, enabling reliable CFD prediction of submarine manoeuvring forces, vortices, and wake dynamics for complex appended geometries.
October 29, 2025 Webinar
Learn how GridPro seamlessly couples with an optimizer, parametric CAD (CAESES), and solver (Ansys CFX by Flowthermolab) to enable a fully automated, simulation-driven design loop.
Learn more
November 08, 2025. Case Study
When NASA set out to simulate its Supersonic Inflatable Aerodynamic Decelerator, accuracy was non-negotiable. GridPro’s structured multiblock meshing delivered the precision needed to capture complex flow physics, dynamic motion, and wake interactions
October 9, 2025 Press Release
UPC Space Program partners with PDC’s GridPro to advance student-led aerospace innovation.
October 08, 2025. Case Study
GridPro delivers precise, high-quality CFD mesh generation for ocular fluid dynamics, enabling accurate simulations of aqueous humor flow, intraocular pressure, and surgical outcomes to support advanced ophthalmic research and treatment planning.
September 08, 2025 Case Study
GridPro’s structured multi-block grids optimized high-lift airfoil configurations, improving CFD accuracy, reducing computational cost, and delivering aerodynamic performance gains.
September 05, 2025. Version Release
GridPro Unveils Version 10.0: A leap forward in Structured Multiblock Meshing.
July 15, 2025. Blog Articles
This article delves into how CFD and structured meshing, particularly with tools like GridPro, are revolutionizing space debris research
July 1, 2025. Case Study
The case study presents how GridPro enabled accurate CFD simulations for dynamic stall suppression using COMPACT actuation on a VR-12 airfoil.
June 25, 2025. Case Study
GridPro enabled the automated optimization of 3D supersonic inlets by generating high-quality structured meshes for over 500 design variants.
June 24, 2025. Case Study
GridPro tackled the complex, unsteady flow of single-channel pumps with reliable structured meshes.
June 13, 2025. Collaborations
Collaboration with Dr. Kianoosh Yousefi, assistant professor in the Department of Mechanical Engineering at the University of Texas at Dallas, to support research in hypersonic vehicle simulation.
Read More
June 5, 2025. Blog Articles
Volute’s geometrical parameters such as cross-sectional shape, area distribution and radial position, volute inlet location and tongue geometry influence the compressor’s performance.
June 3, 2025. Press Releases
Flexcompute, producers of GPU-native CFD solver Flow360, and GridPro, experts in structured mesh generation, are partnering on an integrated solution aimed at accelerating computational fluid dynamics (CFD) simulations.
Learn More
